Orange Line bre.CAM cutter

Especially for the dry machining of thermoplastic materials

The innovative cutting geometry of the ORANGE LINE – bre.CAM cutters enables the dry processing of PMMA, PEEK
and other thermoplastic materials in CNC milling machines.

Due to the low heat generation of the ORANGE LINE – bre.CAM cutter during the milling process, easily fusing materials can be machined without the need for water cooling. Warping of delicate structures is avoided. Even at a high
feed rate, the ORANGE LINE – bre.CAM cutter generates a smooth surface on the workpiece thanks to its patented cutting of multiple rear reliefs. This saves time during the milling process and further processing.

1. Radial relief angle divided into thirds to reduce heat when feeding into the milling process.
2. Relief angle divided into thirds to reduce heat when starting the milling process. Machined clearance shape in the half radius.
3. Side clearance that starts at the pull to optimise chip removal along the z-axis (immersion in the material).
4. Multiple rear reliefs to reduce heat generation.
5. Tapered, sharp cutting edge cutting for precise heat-reduced cutting.
6. Radial geometry shaping area, on one side to define the radius of the milling result.
7. Single-edged pull with tapered cutting angle for quick and coarse chip removal.

ADVANTAGE!

Thanks to a special cutting geometry, it is also possible to take thermoplastic materials, which have properties which allow them to spread quickly and clog up the tool, and mill them without water cooling.

ORANGE LINE - bre.CAM cutter

Milling tools design

ORANGE LINE bre.CAM cutter

Especially for the dry machining of thermoplastic materials

ADVANTAGE!

Copyright 2021 © All rights Reserved by bredent GmbH & Co.KG

Support Team